![](images/102/ITSC2020.gif) |
Abstract No.: |
|
Scheduled at:
|
Thursday, June 11, 2020, Hall K2 2:40 PM Tribological Coatings I
|
|
Title: |
Microstructural and tribological properties of plasma sprayed chromia alloyed with different oxides
|
|
Authors: |
Luca Lusvarghi* / University of Modena and Reggio Emilia , Italy Daniel Steduto / Università di Modena e Reggio Emilia, Italy Jarkko Kiilakoski/ Tampere University, Finland Alessia Bruera/ Università di Modena e Reggio Emilia, Italy Tommi Varis/ Tampere University , Finland Luca Lusvarghi/ Università di Modena e Reggio Emilia, Italy Giovanni Bolelli/ Università di Modena e Reggio Emilia, Italy Petri Vuoristo/ Tampere University, Finland
|
|
Abstract: |
Plasma spraying was used to deposit different chromia based coatings under identical spray parameters. The compositions of the coatings manufactured were pure chromia, chromia-titania, chromia-alumina and chromia-zirconia. The behaviour of the different powders in the plasma spray process were investigated. The powders and the coatings manufactured were investigated and compared with each other. Powder feedstocks microstructure, phase and chemical composition and size distribution were studied. Coatings characterization was as a first step focussed on their microstructure and denseness (FEG-SEM, XRD). Coating hardness was also measured. Tribological investigation included sliding wear, abrasion wear and erosion wear tests, according to ASTM G99, G105 and G76, respectively. Wear rates were measured by weight loss and optical profilometry. Wear mechanisms were investigated by FEG-SEM and Rama spectroscopy. Presence of significant tribofilms in sliding wear conditions was studied by FIB (Focused Ion Beam) milling.
|
|